Who says BluTack® is ideal for papers?
This catalog from the historic glass factory Cristalerías Planell (Barcelona), belongs to the Municipal Archive of Barcelona, Les Corts District, and it had BluTack on its front cardboard.
In few months the adhesive provoked fat stains, fibres oxidation… and favored tears formation. Wanting to take off the cover from the support where it was fixed (a wall), the broken result was the cardboard, not the wall (logical). So this supposedly non-greasy and reversible Bluetack is neither one thing nor the other: don’t let be fooled!
The manufacturer states that its use is suitable for non-porous surfaces, from which it is deduced (since not specified) that paper would be excluded from the ideal media where to use Blu Tack.
The intervention consisted on taking off the blue mass and removing the fatty remnant (the stain) using non polar solvents. After that the tear was inserted with 3 gr japanese paper on the front, and also inserted with a thicker paper on the back.
Once restored, the catalog was exhibited on the Municipal Archive Les Corts District (Barcelona) on the exhibition “Living in Les Corts at the first franquism period“.
It could be satisfactory restored… but mistrust BluTack to avoid scares!
Related content:
![How to preserve a plastic tape, but remove the sticky adhesive This document will self-destruct in 30 secs!](https://ritaudina.com/en/wp-content/uploads/sites/3/2015/09/restoration-removing-sensitive-tapes-from-paper-140x140.jpg)
![Damned “sellotapes”! Damned “sellotapes”!](https://ritaudina.com/wp-content/uploads/2014/09/restauracio-diazotips-aquarelats-terrassa-amb-celo-miniatura.jpg)
![removing a plastic layer from a binding removing a plastic layer from a binding](https://ritaudina.com/wp-content/uploads/2011/06/bibliopata-enquadernacio-en-pasta-jaspiada-150x150.jpg)
![Gels, microemulsions and nano-systems applied to tape removal Gels, microemulsions and nano-systems applied to tape removal](https://ritaudina.com/es/wp-content/uploads/sites/2/2018/06/nano-geles-microemulsiones-cintas-adhesivas-papel-150x150.jpg)
Filter post by:
Who says BluTack® is ideal for papers?
This catalog from the historic glass factory Cristalerías Planell (Barcelona), belongs to the Municipal Archive of Barcelona, Les Corts District, and it had BluTack on its front cardboard.
In few months the adhesive provoked fat stains, fibres oxidation… and favored tears formation. Wanting to take off the cover from the support where it was fixed (a wall), the broken result was the cardboard, not the wall (logical). So this supposedly non-greasy and reversible Bluetack is neither one thing nor the other: don’t let be fooled!
The manufacturer states that its use is suitable for non-porous surfaces, from which it is deduced (since not specified) that paper would be excluded from the ideal media where to use Blu Tack.
The intervention consisted on taking off the blue mass and removing the fatty remnant (the stain) using non polar solvents. After that the tear was inserted with 3 gr japanese paper on the front, and also inserted with a thicker paper on the back.
Once restored, the catalog was exhibited on the Municipal Archive Les Corts District (Barcelona) on the exhibition “Living in Les Corts at the first franquism period“.
It could be satisfactory restored… but mistrust BluTack to avoid scares!